1963-1972 GM C10 Pickup Front Suspension W/ Fabricated Arms & Coilover Brackets - All American Billet 6372GMFS-FACO
If the goal is to completely drag your C10 pickup through the weeds, it takes some frame modifications. All American Billet builds this fully fabricated, bolt-on front suspension system to help accomplish just that! The low profile design keeps the lowest part of the cross member above the lowest part of the frame rail. It also tucks your rolling stock closer to the frame rails, narrowing your track width by a total of 3-inches. These two features are essential when trying to stuff tire in the wells and lay rockers. This fabricated suspension system also moves wheels forward for a more centered location in the wheel opening at ride height, when compared to using the stock GM components. All American Billet has your '63-'72 GM C10 frame components and suspension system covered!
Includes-
- Cross member
- Control arms
- Upper control arm mounts
- Motor mounts
- Inner frame support
- Rack and pinion adapter
- All hardware needed to install
Features-
- Completely bolt-on and does not require welding or frame notching for rack and pinion
- Lower cross member ties into the upper control arm brackets, inner frame block and the motor mounts, creating a stronger assembly
- Low profile design keeps the lowest part of the cross member above the lowest part of the frame rail
- Easy caster and camber adjustment
- Moves wheels forward for a more centered location with the wheel opening in the front fenders
- Cross member will accept either manual or power rack and pinion (mustang ii style)
- Completely bolt-on and does not require welding or frame notching for rack and pinion
- Does not require modification of spindle for steering
- Lower cross member ties into the upper control arm brackets, inner frame block and the motor mounts, creating a stronger assembly.
- Low profile design keeps the lowest part of the cross member above the lowest part of the frame rail
Notes-
- Motor Mounts = SCB or BBC Engine
- 19"+ Wheels or Spacers May Be Needed To Clear Tie Rod Ends
- 6" Ride Height (Ground To Bottom of Frame)with 30" Tires and 2.5" Drop Spindles Installed
- Narrows Track Width A Total Of 3”
Made in the USA
All American Billet Part # 6372GMFS-FACO
